Analysis of Temperature Feature for Pipeline of Novel Dual-wave Shock Test Machine

doi:10.3969/j.issn.1006-1335.2012.06.005

›› 2012, Vol. 32 ›› Issue (6): 20-22.DOI: 10.3969/j.issn.1006-1335.2012.06.005

Previous Articles Next Articles

Analysis of Temperature Feature for Pipeline of Novel Dual-wave Shock Test Machine

WEN Zhao-dong,ZHANG Lei,SHI Shao-hua

( Naval Academy of Armament, Beijing 100161, China )

Received:2012-06-12 Revised:2012-08-14 Online:2012-12-18 Published:2012-12-18

船用设备双波冲击试验机管路温度特性分析

温肇东，张磊，史少华

（海军装备研究院，北京 100161 ）

通讯作者: 温肇东

Abstract

Abstract: A finite element model for pipelines of novel dual-wave shock testing machine was built by means of FLUENT code. The flow field and the temperature field of the pipelines in different status were analyzed. Simulation results show that the temperature of the pipelines rises about 3°C in operation status, which will not affect the use of the dual-wave shock testing machine.

Key words: vibration and wave , dual-wave shock test machine , pipe , flow field , temperature

摘要： 采用FLUENT软件建立船用设备双波冲击试验机管路流体有限元模型，并对管路中流体在不同工作状态下系统流场分布及系统温度变化情况进行分析。仿真结果表明，管路中流体在工作状态下温度最高上升3度左右，满足船用设备双波冲击机的使用条件。

关键词: 振动与波, 冲击试验机, 管路, 流场, 温度

CLC Number:

TH137

WEN Zhao-dong,ZHANG Lei,SHI Shao-hua. Analysis of Temperature Feature for Pipeline of Novel Dual-wave Shock Test Machine[J]. , 2012, 32(6): 20-22.

温肇东，张磊，史少华. 船用设备双波冲击试验机管路温度特性分析[J]. 噪声与振动控制, 2012, 32(6): 20-22.

[1]	Yong fangKong. Comparative Study of Two Implementation Methods for Skyhook Damper in Soft Vibration Isolation Platform [J]. Noise and Vibration Control, 2022, 42(2): 226-230.
[2]	. Performance Research on Non-Equidistant Axial Fans Arranged by Preferred Numbers [J]. Noise and Vibration Control, 2022, 42(2): 67-72.
[3]	. Analysis of Vibration Characters of Excitation Sources in Gas Turbine Rotor Systems [J]. , 2017, 37(6): 51-55.
[4]	. Algorithm for Modification of Measurement Data for Sound Transmission Loss of Acoustical Materials in Standing-wave Pipes [J]. , 2014, 34(4): 115-118.
[5]	. Two Solutions to Eliminate Standing Waves of Exhaust Systems [J]. , 2013, 33(3): 90-92.
[6]	. Effect Analysis of Temperature-decay Performance of Magneto-rheological Fluid Damper on Tracked Vehicle Suspension System [J]. , 2013, 33(3): 119-123.
[7]	. Dynamic Characteristic Analysis of Fluid-filled Pipe under the Action of Fluctuating Pressure [J]. , 2013, 33(2): 11-14.
[8]	. Noise and Vibration Experiment of a Swashplate-rod Bilge Pump Set [J]. , 2013, 33(2): 201-204.
[9]	. Attitude Control of Air Spring Raft Isolation System [J]. , 2013, 33(1): 40-44.
[10]	SUN Dan，LI Wan-you，LV Bing-lin. Review of Structural Modeling Methods for Bolted Joints [J]. , 2012, 32(6): 8-12.
[11]	HUANG Jian-song,WANG Yu. Analysis of Shock Injury of Ship Personnel due to Underwater and Air Explosion [J]. , 2012, 32(6): 13-16.
[12]	ZHAO Peng-duo,DU Jian-ye,ZHANG Lei. Dynamic Responses of Three Kinds of Ship Alloy Steels [J]. , 2012, 32(6): 17-20.
[13]	YANG Li，DU Jian-ye，DU Zhi-peng，WEN Zhao-dong. Security Analysis for Floating Shock Platform Test Subjected to Underwater Explosion [J]. , 2012, 32(6): 23-25.
[14]	HAN Qing-peng 1, SUN Wei 2， QI Fei 2. Parameter Identification of Material Characteristics of Hard Coatings Using Vibration Beam Method [J]. , 2012, 32(6): 150-153.
[15]	SUN Bing-nan，XIE Fan，JING Jian-ping. Effects of Bearings Support Characteristics on Shaft Stability [J]. , 2012, 32(6): 137-140.

Analysis of Temperature Feature for Pipeline of Novel Dual-wave Shock Test Machine

船用设备双波冲击试验机管路温度特性分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics