›› 2009, Vol. 29 ›› Issue (6): 26-29.DOI: 10.3969/j.issn.1006-1355.2009.06.026

• 论文 • Previous Articles     Next Articles

The Detection of Transformer Windings’Deformation Based on the Method of Frequency Response Analysis

XU Jian1,SHAO Yu-ying2,JIN Zhi-jian1,RAO Zhu-shi2,JIANG Yi-min3,Zhou Kai4

  

  1. (1. Department of Electrical Engineering, Shanghai Jiaotong University, Shanghai200240, China;2. State Key Lab. of Mechanical System And Vibration, Shanghai Jiaotong University, Shanghai200240, China; 3. Shanghai Electric Power Company, Shanghai200122, China4.Shanghai Power Transformer Repairing & Testing Factory Co.Ltd, Shanghai200436, China)
  • Received:2009-06-02 Revised:1900-01-01 Online:2009-12-18 Published:2009-12-18
  • Contact: XU Jian

《基于振动频响法的变压器绕组变形检测》

徐剑1,邵宇鹰2,金之俭1,饶柱石2,姜益民3,周凯4   

  1. (1.上海交通大学电气工程系,上海200240; 2.上海交通大学机械系统与振动国家重点实验室,上海200240;3.上海市电力公司,上海200122; 4.上海市电力变压器修试厂有限公司,上海200435)
  • 通讯作者: 徐剑

Abstract:

Windings’ deformation is one of the most frequent faults for the power transformer. Based on the vibration frequency response analysis, this paper proposes a correlation coefficient of vibration frequency response curve in order to more effectively detect the windings deformation. In the experiments, the vibration frequency response method is used to detect the states of largescale power transformers windings which are manmade fault. The results analysis shows that this correlation coefficient is sensitive to the windings deformation.

Key words: vibration and wave, transformer, winding, frequency response, correlation coefficient

摘要:

为了更加有效地识别绕组的变形故障,在基于机械振动频响法对变压器绕组进行检测的基础上,提出了标示绕组形变程度的振动频响曲线相关系数。通过对大型变压器的绕组进行人为故障设定,利用机械振动频响法对故障绕组进行检测,试验证明该振动频响曲线相关系数对判断变压器绕组变形具有较高的灵敏度。

关键词: 振动与波, 变压器, 绕组, 振动频响法, 相关系数

CLC Number: