›› 2009, Vol. 29 ›› Issue (6): 30-33.DOI: 10.3969/j.issn.1006-1355.2009.06.030

• 论文 • Previous Articles     Next Articles

《Analysis of Fluidconveying Pipe with Transfer Matrix Method》

JIN Chang-ming1,WANG Gan-cheng1,GAO Kang2,CHEN Ting-yan1,LI Hong-guang1   

  1. (1. State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University, Shanghai200240, China; 2. marine design and research institute,Shanghai200240, China)
  • Received:2009-06-02 Revised:1900-01-01 Online:2009-12-18 Published:2009-12-18
  • Contact: JIN Chang-ming

《充液管道的传递矩阵法分析》

金长明1,王赣城1,高康2,陈婷艳1,李鸿光1   

  1. (1.上海交通大学机械系统与振动国家重点实验室,上海200240; 2.中国船舶及海洋工程设计研究院,上海200011)
  • 通讯作者: 金长明

Abstract:

The transfer matrices of the axial, flexible and torsional modes of fluidconveying elbow pipe are deduced considering fluidstructure interaction between pipe and fluid. Calculate the modal frequency and shape of a “U” shape pipe with Transfer Matrix Method and ANSYS software respectively. The results indicate that Transfer Matrix Method is an effective way to analyze fluidconveying pipe. The effect of fluidstructure interaction can not be ignored which will depress the modal frequency of the pipe.

Key words: vibration and wave, fluidconveying pipe, transfer matrix, modal analysis, fluidstructure interaction

摘要:

考虑流固耦合作用,建立同时考虑轴向、横向、扭转振动的充液弯管传递矩阵。对一“U”形充液管道进行研究,分别使用传递矩阵法和ANSYS软件计算模态频率和振型。结果说明,传递矩阵法可以有效的对充液弯管进行模态分析,且流固耦合作用会降低管系固有频率,影响不可忽略。

关键词: 振动与波, 充液弯管, 传递矩阵法, 模态分析, 流固耦合

CLC Number: