噪声与振动控制

›› 2011, Vol. 31 ›› Issue (3): 60-64.DOI: 10.3969/j.issn.1006-1355-2011.03.014

• 3.运载工具振动与噪声 • 上一篇    下一篇

驾驶室声场响应面仿真模型的构建及应用

王彬星1,郑四发2,周林,连小珉   

  1. （ 清华大学 汽车安全与节能国家重点实验室， 北京 100084 ）
  • 收稿日期:2010-09-03 修回日期:2010-10-11 出版日期:2011-06-18 发布日期:2011-06-18
  • 通讯作者: LIAN Xiao-min

Modeling of Acoustic Characteristics of a Cab with Response Surface Method and its Application

WANG Bin-xing,ZHENG Si-fa,ZHOU lin,LIAN Xiao-min   

  1. ( State Key Lab. of Automotive Safety and Energy, Tsinghua University, Beijing 100084， China )
  • Received:2010-09-03 Revised:2010-10-11 Online:2011-06-18 Published:2011-06-18
  • Contact: 连小珉

摘要： 吸声材料广泛应用于车辆噪声控制中。将响应面法引入整车声场建模中，研究对象为敷设有大量吸声材料的某商用车驾驶室。首先通过面板声学贡献度分析选定需要的设计变量，进行试验设计，建立考虑吸声特性的驾驶室仿真模型，用以进行数值试验得到响应变量，进而构建驾驶室声场的响应面模型。应用得到的响应面模型对驾驶室各位置吸声材料的厚度进行优化。结果表明，优化后的方案在减少吸声材料厚度的同时也有效提高降噪效果。

关键词: 声学, 吸声材料, 噪声控制, 响应面, 仿真

Abstract: Sound absorbing materials have been widely used in the vehicle noise control. In this paper, the response surface method is applied to the acoustic modeling of the cab of a heavy truck with a variety of sound absorbing materials attached. Design variables are determined with the panel’s acoustic contribution analysis, and the design of the experiments is made. A simulation model of the cab with the consideration of sound absorption characteristics is built to carry out the designed experiments. With the obtained response variables, the response surface model of the sound pressure on the side of the driver’s right ear is built. The effectiveness of the model is validated. The response surface model has been applied to the thicknesses optimization of the sound absorbing materials for different panels of the cab. It shows that after the optimization, the thicknesses of sound absorbing materials are reduced, and the effect of noise reduction is improved at the same time.

Key words: acoustics, sound absorbing material, noise control, response surface, modeling

中图分类号: