›› 2012, Vol. 32 ›› Issue (6): 146-149.DOI: 10.3969/j.issn.1006-1335.2012.06.035

Previous Articles     Next Articles

Finite Element Analysis of Vibration Reduction of Pipelines with Different Perforated Damping

CHEN Yuan,RUAN  Xiao-hui,HUANG Tao ,ZHOU  jing-dong,ZHOU  Xiao-qiang,ZHOU  Ming-gang   

  1. ( College of Mechanical Engineering Hubei University of Technology,  Automotive Structure Vibration and Noise Control Engineering Research Center of Hubei Province,  Wuhan  430068,  China )
  • Received:2012-03-29 Revised:2012-05-08 Online:2012-12-18 Published:2012-12-18

包覆不同开孔阻尼结构的管道减振仿真分析

陈源1,阮晓辉1,周明刚2,黄涛1,周敬东1,周小强3   

  1. ( 湖北工业大学  湖北省汽车结构振动与噪声控制工程技术研究中心,  武汉  430068 )
  • 通讯作者: 阮晓辉
  • 基金资助:

    国家自然基金

Abstract: The structural dynamic problems of viscoelastic composite pipelines were calculated by means of ANSYS software based on the modal strain energy method, and the APDL code was used for programming. The results were compared with those from the Matlab code. Some results of the effect of different perforating patterns on noise reduction of the pipeline’s damping structure were provided. This work may provide a reference for similar engineering projects.

Key words: vibration and wave , pipeline , viscoelastic damping structure , modal strain energy method

摘要: 利用ANSYS软件,采用模态应变能法,通过APDL语言编程,近似计算粘弹性复合管道结构的动力问题,应用MTLAB软件对ANSYS计算结果的比较,得出一些关于不同开孔方式对管道阻尼结构减振效果的对比结果,为实际工程类似管道结构设计提供一些借鉴。

关键词: 振动与波, 管道, 粘弹阻尼结构, 模态应变能法

CLC Number: