›› 2010, Vol. 30 ›› Issue (3): 85-90.DOI: 10.3969/j.issn.1006-1355.2010.03.023

• 运载工具振动与噪声 • Previous Articles     Next Articles

《Numerical Simulation of Vibration and Sound Radiation of Tires》

CHAN Liang1G,XIAO Wang-xin2,XIE Wei-ping1   

  1. (1. School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China;2. Research Institute of Highway, Ministry of Communications, Beijing 100088, China)
  • Received:2009-06-07 Revised:1900-01-01 Online:2010-06-18 Published:2010-06-18
  • Contact: CHAN Liang1

《轮胎振动声辐射数值分析》

常亮1,肖旺新2,谢伟平1   

  1. （1.武汉理工大学土木工程与建筑学院,武汉30070; 2.交通部公路科学研究院,北京100088）
  • 通讯作者: 常亮

PDF

Abstract: Numerical simulations of vibration and sound radiation of the 225/50R17 smoothing tire and longitudinally grooved tire excited by surface load are carried out by using the FEM software ANSYS and the BEM software SYSNOISE. The displacement frequency responses of the tires excited by, respectively, radial contact force, tangential contact force and lateral contact force are calculated using FEM. Then, the result of nodal displacement responses is used as the boundary condition for the BEM model. The radiation sound power, radiation efficiency, and the directivity of sound in far field in three working cases are computed by means of BEM technique.

Key words: vibration and wave, tire, radiation sound power, radiation efficiency, directivity in far field

摘要： 以225/50R17光面和纵向刻槽子午线轮胎为例，利用有限元软件ANSYS和边界元软件SYSNOISE对在面荷载激励下的轮胎振动与声辐射做了数值计算和分析。在有限元模型中，分别计算了轮胎在受径向接触面力、切向接触面力和侧向接触面力时的位移频率响应。将有限元计算的节点位移响应结果传递到边界元模型中，作为边界元模型的速度边界条件，利用边界元技术分别计算了三种工况下轮胎的辐射声功率、辐射效率和远场指向性。

关键词: 振动与波, 轮胎, 辐射声功率, 辐射效率, 远场指向性

CLC Number: