噪声与振动控制

›› 2011, Vol. 31 ›› Issue (4): 64-67.DOI: 10.3969/j.issn.1006-1355-2011.04.015

• 2.振动理论与数值解法 • 上一篇    下一篇

水润滑橡胶艉轴承动态性能的试验与分析

金勇,刘正林   

  1. ( 武汉理工大学 能动学院, 武汉 430063 )
  • 收稿日期:2010-10-08 修回日期:2010-11-22 出版日期:2011-08-18 发布日期:2011-08-18
  • 通讯作者: 金勇

Experimental Research on Performance of Water-lubricated Rubber Stern Bearing Based on Vibration Analysis

JIN Yong,LIU Zheng-lin   

  1. ( School of Power and Energy, Wuhan University of Technology, Wuhan 430063, China )
  • Received:2010-10-08 Revised:2010-11-22 Online:2011-08-18 Published:2011-08-18
  • Contact: Jin Yong

摘要： 针对船舶艉轴承的减振降噪进行橡胶材料硬度对艉轴系振动影响的试验研究。通过Pulse振动分析平台对艉轴承的振动情况进行数据采集和分析，应用振动频谱分析法得出对于常工作在低速重载工况下的水润滑橡胶轴承其内表面宜趋近的邵氏硬度为80时，对于中高速则可稍微提高一些。

关键词: 振动与波, 艉轴承, 振动分析, Pulse, 硬度

Abstract: In order to reduce vibration and noise of the marine’s stern bearing, the influence of the hardness of the rubber material on vibration of the stern shafting is studied experimentally. The vibration data of the stern bearing is gathered and analyzed through the Pulse vibration analysis platform. Through the analysis of the vibration spectrogram, it is suggested that the hardness of the inner surface of the water-lubricated rubber stern bearing, which usually operates under the conditions of low speed and heavy duty, should reach such a level as 80, and it could be slightly higher for the stern bearing which operates at medium and high speed.

Key words: vibration and wave, stern bearing, vibration analyses, Pulse, hardness

中图分类号: