Co-simulation on Semi-active Suspension of Vehicles

doi:10.3969/j.issn.1006-1355-2011.05.024

›› 2011, Vol. 31 ›› Issue (5): 104-107.DOI: 10.3969/j.issn.1006-1355-2011.05.024

• 3.运载工具振动与噪声 • Previous Articles Next Articles

Co-simulation on Semi-active Suspension of Vehicles

ZHAO Yong-guang,CHEN Jian

( School of Mechanical and Automotive Engineering， Hefei University of Technology, Hefei 230009, China)

Received:1900-01-01 Revised:1900-01-01 Online:2011-10-18 Published:2011-10-18

半主动悬架控制的联合仿真

赵永光，陈剑

（合肥工业大学噪声振动研究所，合肥 230009 ）

通讯作者: 赵永光

Abstract

Abstract: This paper presents the co-simulation of a semi-active suspension of a vehicle. Firstly, a multi-body dynamic model of the suspension is established by using ADAMS code. Secondly, a fuzzy controller for semi-active suspension is programmed by means of Matlab/Simulink. Finally, the co-simulation is carried out based on ADAMS and Matlab/Simulink. Simulation results show that the semi-active suspension system can improve the ride performance of the vehicle.

Key words: vibration and wave, semi- active suspension, co-simulation, fuzzy control, ADAMS

摘要： 对某汽车的半主动悬架进行了联合仿真。首先，用ADAMS软件建立汽车悬架的多体动力学模型。其次，通过Matlab/simulink编写模糊控制算法。最后，通过连接Adams软件和对其进行联合仿真。将采用半主动悬架系统得到的仿真结果与采用被动悬架系统得到的仿真结果进行性能对比, 结果表明半主动悬架系统改善车辆的行驶平顺性。

关键词: 振动与波, 悬架控制, 模糊控制, 联合仿真

CLC Number:

ADAMS

ZHAO Yong-guang;CHEN Jian. Co-simulation on Semi-active Suspension of Vehicles[J]. , 2011, 31(5): 104-107.

赵永光;陈剑. 半主动悬架控制的联合仿真[J]. , 2011, 31(5): 104-107.

[1]	Yong fangKong. Comparative Study of Two Implementation Methods for Skyhook Damper in Soft Vibration Isolation Platform [J]. Noise and Vibration Control, 2022, 42(2): 226-230.
[2]	. Optimum Design for a Quasi-zero Stiffness Vibration Isolation System Based on Genetic Algorithm [J]. , 2016, 36(6): 173-177.
[3]	. Parameters Optimization and Semi-active Control of Suspensions Based on Road Friendliness [J]. , 2014, 34(5): 57-60.
[4]	. Attitude Control of Air Spring Raft Isolation System [J]. , 2013, 33(1): 40-44.
[5]	SUN Dan，LI Wan-you，LV Bing-lin. Review of Structural Modeling Methods for Bolted Joints [J]. , 2012, 32(6): 8-12.
[6]	HUANG Jian-song,WANG Yu. Analysis of Shock Injury of Ship Personnel due to Underwater and Air Explosion [J]. , 2012, 32(6): 13-16.
[7]	ZHAO Peng-duo,DU Jian-ye,ZHANG Lei. Dynamic Responses of Three Kinds of Ship Alloy Steels [J]. , 2012, 32(6): 17-20.
[8]	WEN Zhao-dong,ZHANG Lei,SHI Shao-hua. Analysis of Temperature Feature for Pipeline of Novel Dual-wave Shock Test Machine [J]. , 2012, 32(6): 20-22.
[9]	YANG Li，DU Jian-ye，DU Zhi-peng，WEN Zhao-dong. Security Analysis for Floating Shock Platform Test Subjected to Underwater Explosion [J]. , 2012, 32(6): 23-25.
[10]	HAN Qing-peng 1, SUN Wei 2， QI Fei 2. Parameter Identification of Material Characteristics of Hard Coatings Using Vibration Beam Method [J]. , 2012, 32(6): 150-153.
[11]	SUN Bing-nan，XIE Fan，JING Jian-ping. Effects of Bearings Support Characteristics on Shaft Stability [J]. , 2012, 32(6): 137-140.
[12]	YU Lie 1, LIN Bin-bin 2. Properties of Vertical Vibration of Floating Pile in Viscoelastic Soil [J]. , 2012, 32(6): 154-157.
[13]	CHEN Yuan,RUAN Xiao-hui,HUANG Tao,ZHOU jing-dong,ZHOU Xiao-qiang,ZHOU Ming-gang. Finite Element Analysis of Vibration Reduction of Pipelines with Different Perforated Damping [J]. , 2012, 32(6): 146-149.
[14]	SONG Yu，CHEN Wei-dong，ZHANG Jin. GA-optimized Fuzzy Control of Semi-active Suspension System for High-speed Train [J]. , 2012, 32(6): 158-164.
[15]	WANG　Xin-kan 1，2,CHEN Jian 1，2. Robust Optimization Algorithm for Powertrain Mounting System of Automobiles [J]. , 2012, 32(6): 169-174.

Co-simulation on Semi-active Suspension of Vehicles

半主动悬架控制的联合仿真

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics