›› 2010, Vol. 30 ›› Issue (3): 108-112.DOI: 10.3969/j.issn.1006-1355.2010.03.029

• 运载工具振动与噪声 • Previous Articles     Next Articles

《Computation of Shock Response of a Warship’s Transformer》

JIANG Guo-he1,XUE Bin2,FENG Wei3,WU Guang-ming3   

  1. (1. Merchant Marine College, Shanghai Maritime University, Shanghai 200135, China;2. School of Naval Architecture and Ocean Eng.,Jiangsu University of Science and Technology, Zhenjiang Jiangsu 212003, China;3. Ship Development & Design Center, Shanghai 201102, China)
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-06-18 Published:2010-06-18
  • Contact: JIANG Guo-he1

《舰用变压器冲击响应计算》

江国和1，薛彬2，冯维3，吴广明3   

  1. （1.上海海事大学商船学院，上海200135； 2.江苏科技大学船舶与海洋工程学院，江苏镇江212003；3.中国舰船研究设计中心，上海201102）
  • 通讯作者: 江国和

PDF

Abstract: Transformer is an important equipment of warship’s electrical system. In this paper, the finite element model of a warships transformer is established by means of the ANSYS code. The structural vibration modes of the transformer are obtained through the modal analysis. The rationality of the model is verified. Then, transformers shock load is studied and shock load resistance is analyzed. The time and location for the maximum stress are determined through the transient response analysis. This work is beneficial for further study on antishock property of warships transformers.

Key words: vibration and wave, warship’s transformer, transient response analysis, shock load, finite element modeling, modal analysis

摘要： 变压器是舰船电力系统的重要组成部分，其可靠性对于舰艇的生命力和战斗力有着非常重要的影响。利用ANSYS软件建立了某舰用变压器的有限元模型。通过对有限元模型进行结构振动模态分析，分析变压器的固有振型特性，验证模型的合理性。研究舰用变压器的冲击载荷，对变压器模型进行瞬态响应分析计算，得到变压器应力最大时刻和应力最大位置，并进行抗冲击载荷分析，有利于舰用变压器抗冲击性能的进一步研究。

关键词: 振动与波, 舰用变压器, 瞬态响应分析, 冲击载荷, 有限元建模, 模态分析

CLC Number: