《Vibration Mode Analysis of Roots Blower’s Shell》

doi:10.3969/j.issn.1006-1355.2010.01.015

›› 2010, Vol. 30 ›› Issue (1): 15-17.DOI: 10.3969/j.issn.1006-1355.2010.01.015

• 振动理论与数值解法 • Previous Articles Next Articles

《Vibration Mode Analysis of Roots Blower’s Shell》

WANG Fu-mao1,HE Jing-yu1,ZHAO Li-fang2,LI Zhi-min1,DING Hong-chang1

(1. College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao Shandong266510, China; 2. The Second Machine Tool Group Co. Ltd, Jinan250000, China)

Received:2009-04-27 Revised:1900-01-01 Online:2010-02-18 Published:2010-02-18
Contact: WANG Fu-mao

《罗茨鼓风机壳体振动模态分析》

王孚懋1,何敬玉1,赵丽芳2,李志敏1,丁鸿昌1

（1．山东科技大学机械电子工程学院，山东青岛266510；2．济南第二机床集团有限公司，济南250000）

通讯作者: 王孚懋

Abstract

Abstract:

In this paper, the dynamic characteristic of Roots blower's shell is analyzed by the ANSYS code. The natural frequencies and the vibration modes of the shell are given. The output of computation shows that the natural frequency of the shell is higher than the fundamental frequency of the rotor system, and the vibration modes of the shell structure are mainly bending, twisting, and their combination. The dynamic analysis of the shell may predict the faults in structural design, and provide some scientific basis for reducing the structural vibration and the noise of the Roots blower.

Key words: vibration and wave, Roots blower, shell, modal analysis, finite element, ANSYS

摘要：

应用有限元ANSYS软件对罗茨鼓风机壳体进行动态特性分析，计算风机壳体振动的固有频率与振型，给出振型图。分析结果表明，风机壳体的固有频率高于转子系统的旋转基频，结构振动主要表现为弯曲、扭转和弯扭组合形态。通过风机壳体动态特性分析，能够预知结构设计的薄弱环节，为减振降噪与结构改型提供参考。

关键词: 振动与波, 风机, 壳体, 模态分析, 有限元, ANSYS

CLC Number:

TP206.3

WANG Fu-mao;HE Jing-yu;ZHAO Li-fang;LI Zhi-min;DING Hong-chang. 《Vibration Mode Analysis of Roots Blower’s Shell》[J]. , 2010, 30(1): 15-17.

王孚懋;何敬玉;赵丽芳;李志敏;丁鸿昌. 《罗茨鼓风机壳体振动模态分析》[J]. , 2010, 30(1): 15-17.

[1]	Yong fangKong. Comparative Study of Two Implementation Methods for Skyhook Damper in Soft Vibration Isolation Platform [J]. Noise and Vibration Control, 2022, 42(2): 226-230.
[2]	. Analysis of Testing Method for Dynamic Loads of Propulsion Shafting Systems [J]. , 2019, 39(1): 78-83.
[3]	. Modal Experiment and Damping Characteristics Analysis of Constrained Damping Plates [J]. , 2018, 38(6): 205-208.
[4]	. Simulation Study on Metal Rubber Isolators under Periodic Vibration Loads [J]. , 2018, 38(4): 217-220.
[5]	. Modal Analysis of Minibus Wheels [J]. , 2018, 38(3): 72-76.
[6]	. Lag-compensation PID Control for a Flexible Structure with Piezoelectric Stack Actuators [J]. , 2018, 38(2): 30-35.
[7]	. Analysis and Control of Abnormal Noise in Tractor’s Cabs [J]. , 2017, 37(2): 75-79.
[8]	. Design and Behavior Analysis of Two-way Pusher-over MRD [J]. , 2017, 37(2): 178-181.
[9]	. Finite Element Analysis and Optimization Design for Air Conditioner Pipeline Systems [J]. , 2017, 37(1): 26-29.
[10]	. The Finite Element Method for Isolator Design and Test Verification of a Thin Shell Structure of Space Products [J]. , 2017, 37(1): 89-92.
[11]	. Application of Flexibility Curvature Method in Damage Detection of Transmission Towers [J]. , 2016, 36(4): 174-177.
[12]	. Shock Characteristics of a Three-reel Parallel-type Marine Winch [J]. , 2016, 36(2): 76-79.
[13]	. Study on Shock Isolation Performance of Mechanical and Electrical Control Equipment of Warships [J]. , 2016, 36(2): 101-103.
[14]	. [J]. , 2015, 35(6): 197-201.
[15]	. [J]. , 2015, 35(6): 78-81.

《Vibration Mode Analysis of Roots Blower’s Shell》

《罗茨鼓风机壳体振动模态分析》

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics