›› 2011, Vol. 31 ›› Issue (1): 38-42.

• 振动理论与数值解法 • 上一篇    下一篇

齿轮箱声固耦合系统噪声辐射研究

周建星刘更马尚君   

  1. ( 西北工业大学, 西安 710072 )
  • 收稿日期:2010-03-23 修回日期:2010-05-07 出版日期:2011-02-18 发布日期:2011-02-18
  • 通讯作者: 周建星

Noise Analysis of Structural-Acousitc Coupling System

ZHOU Jian-xing,LIU Geng,MA Shang-jun   

  1. ( Northwestern Polytechnical University, Xi’an 710072, China )
  • Received:2010-03-23 Revised:2010-05-07 Online:2011-02-18 Published:2011-02-18
  • Contact: ZHOU Jian-xing

摘要: 综合考虑齿轮时变啮合刚度及齿轮误差的影响建立了齿轮系统动力学模型,计算得到了齿轮系统动载时域历程。建立了齿轮箱声固耦合系统模型,采用边界元法对其噪声辐射进行求解,得到了齿轮箱噪声谱及各板面对声场总声压的贡献度。依据板面贡献度计算结果,对齿轮箱结构进行适当改进,对结构的改进及结构阻尼对降噪效果做出了分析,就不同齿轮类型对齿轮箱噪声辐射的影响进行了讨论,为齿轮箱的设计提供了理论依据。

关键词: 齿轮箱, 时变啮合刚度, 误差, 噪声

Abstract: The dynamic model of the gear transmission system is built in consideration of the time-varying mesh stiffness and the gear errors. Then the time history of the dynamic load of system is obtained. The gear box structural-acoustic coupling system is built and calculated by using BEM. The noise spectrum of the gear box and the panel contribution are obtained. The effect of the gear box structure improvement, structure damping and different gear style on the noise radiation is analyzed. The study provides useful theoretical guideline to the design of the gear box.

Key words: Gear Box, Time-Varying Mesh Stiffness, Error, Noise