噪声与振动控制

›› 2011, Vol. 31 ›› Issue (6): 180-182.DOI: 10.3969/j.issn.1006-1355-2011.06.041

• 7.减振降噪设备和器材 • 上一篇    下一篇

304金属橡胶去应力退火工艺研究

赵 程,罗 昆,李 响   

  1. ( 郑州航空工业管理学院 机电工程学院， 郑州 450015 )
  • 收稿日期:2011-03-04 修回日期:2011-03-31 出版日期:2011-12-18 发布日期:2011-12-18
  • 通讯作者: 赵程

Research of Relief Annealing Technology for 304 Metal Rubber

ZHAO Cheng,LUO Kun,LI Xiang   

  1. ( School of Mechatronics Engineering, Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou 450015, China )
  • Received:2011-03-04 Revised:2011-03-31 Online:2011-12-18 Published:2011-12-18
  • Contact: ZHAO Cheng

摘要： 探讨304金属橡胶去应力退火工艺研究，结果表明：去应力退火工艺显著改变金属橡胶的静态、动态损耗因子；退火温度、退火时间、金属橡胶密度以及冷却方式对金属橡胶静态、动态损耗因子影响的主次顺序存在较大差异；304金属橡胶去应力退火优组合为退火温度270[°C]，退火时间25 m，密度1.6 g/cm3，水冷（应为油冷），为金属橡胶的应用提供参考。

关键词: 振动与波, 304金属橡胶, 去应力退火, 工艺研究

Abstract: Relief annealing technique of 304 Metal Rubber is researched. Test results show that relief annealing can significantly change the static loss factor and the dynamic loss factor of 304 Metal Rubber. It is found that the influences of annealing temperature, annealing time, Metal Rubber density and cooling manner on the static loss factor and the dynamic loss factor are obviously different. The optimal combination of the relief annealing parameters of 304 Metal Rubber is: annealing temperature 270 ℃, annealing time 25 minutes, Metal Rubber density 1.6 g/cm3, and oil cooling manner.

Key words: vibration and wave, 304 metal rubber, relief annealing, technology research

中图分类号: