›› 2009, Vol. 29 ›› Issue (5): 87-89.

• 论文 • 上一篇    下一篇

《金属橡胶粘弹性本构模型研究》

赵程1,2张军2   

  1. (1. 郑州航空工业管理学院机电工程学院,郑州450015;2. 郑州大学机械工程学院,郑州450001)
  • 收稿日期:2009-01-12 修回日期:1900-01-01 出版日期:2009-10-18 发布日期:2009-10-18
  • 通讯作者: 赵程

《Study on Viscoelastic Constitutive Model of MR》

ZHAO Cheng1,2,ZHANG Jun2   

  1. (1. School of Mechatronics Engineering, Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou450015, China;2. School of Mechanical Engineering, Zhengzhou University, Zhengzhou450001, China)
  • Received:2009-01-12 Revised:1900-01-01 Online:2009-10-18 Published:2009-10-18
  • Contact: ZHAO Cheng

摘要: 应用金属橡胶的粘弹性拉压模型,使用通用有限元结构分析软件ANSYS通过平衡迭代求解获得其本构关系。结果表明理论计算曲线与实验曲线吻合较好,为金属橡胶理论的进一步研究打下基础。

关键词: 振动与波, 金属橡胶, 粘弹性, 本构模型

Abstract: Applying the tensioncompression viscoelastic model of metallic rubber (MR), the constitutive law of MR is obtained by means of ANSYS code with quilibrium iteration. The computation result is in good accordance with the experimental data. This work provides a reference for further study of MR.

Key words: vibration and wave, metallic rubber (MR), viscoelasticity, constitutive model

中图分类号: