Computational Method for Shock Resistance Analysis of  Piping System of Diesel Engine

doi:10.3969/j.issn.1006-1335.2012.06.028

›› 2012, Vol. 32 ›› Issue (6): 116-119.DOI: 10.3969/j.issn.1006-1335.2012.06.028

Previous Articles Next Articles

Computational Method for Shock Resistance Analysis of Piping System of Diesel Engine

WANG Hong-wei 1, WANG Yu 2, LI Wei-jun 3

( 1. College of Naval Architecture and Power, Naval Univ. of Engineering, Wuhan 430033, China;2. Naval Arming Academy, Beijing 100073, China;3. Arming Ministry of Naval Unit No.91756, Wenzhou 100073, Zhejiang China )

Received:2012-06-12 Revised:2012-08-18 Online:2012-12-18 Published:2012-12-18

柴油机管路系统抗冲击计算方法研究

汪宏伟 1, 汪玉 2，李伟军 3

（ 1. 海军工程大学船舶与动力学院，武汉 430033； 2. 海军装备研究院，北京 100073；3. 海军91756部队装备部，浙江温州 100073 ）

通讯作者: 汪宏伟

Abstract

Abstract: According to the characteristics of shock resistance computation for pipeline system, a simple method based on beam theory was presented. It was found that the computational result is in good accordance with that from the finite element simulation. Thus, this method provides a good reference for shock resistance design of the pipeline systems.

Key words: shock , shock resistance , computational method , piping system , diesel engine

摘要： 在管路系统抗冲击计算特点的基础上，提出一种运用梁理论计算柴油机管路系统抗冲击问题的简单方法。研究表明，这种方法的计算结果与运用有限元仿真的结果较为吻合，可以作为管路系统在设计阶段抗冲击校核。

关键词: 冲击, 抗冲击, 计算方法, 管路系统, 柴油机

CLC Number:

O381
TK421.3

WANG Hong-wei 1, WANG Yu 2, LI Wei-jun 3. Computational Method for Shock Resistance Analysis of Piping System of Diesel Engine[J]. , 2012, 32(6): 116-119.

汪宏伟 1, 汪玉 2，李伟军 3. 柴油机管路系统抗冲击计算方法研究[J]. 噪声与振动控制, 2012, 32(6): 116-119.

[1]	. Dropping Damage Evaluation for Critical Components of Tilted Support Systems [J]. , 2019, 39(1): 186-191.
[2]	zhang baogang. Design of Flexible Deck Simulators and Their Applications in Shock Resistance Tests [J]. , 2018, 38(2): 55-58.
[3]	. Design of Shock Absorbers for a Shipboard Electronic Cabinet [J]. , 2018, 38(1): 151-155.
[4]	. Analysis of the Shock Response of a Single-layer Vibration Isolation System with a Limiter [J]. , 2017, 37(5): 29-32.
[5]	. Analysis and Optimization of Creep Groan Noise Transfer Path for AT Vehicles [J]. , 2017, 37(5): 124-127.
[6]	. Simulation of Anti-shock Buffering Platform with Large Deformations in 3 Directions [J]. , 2017, 37(3): 185-188.
[7]	yong chen. Design of Plastic Restrictor in a Single-stage Vibration Isolation System [J]. , 2016, 36(3): 184-189.
[8]	. Shock Characteristics of a Three-reel Parallel-type Marine Winch [J]. , 2016, 36(2): 76-79.
[9]	. Variational Iteration Method for Analyzing Dropping Shock ofSuspended Spring System [J]. , 2013, 33(6): 36-39.
[10]	. Outlines of Anti-shock Design for Electronic Equipments on Ships [J]. , 2013, 33(6): 139-142.
[11]	. Comparative Study on UNDEX Resistance of the Air-backed Stiffened Plate with Various Covering Layers [J]. , 2013, 33(4): 11-15.
[12]	. Design of Natural Rubber/304 Composite Shock Absorber [J]. , 2013, 33(3): 231-234.
[13]	DAI Guang-hao,GAO Chang-wei,LIU Yong-heng,ZHANG Fan. Computation and Analysis of Shock Characteristics of Elastically Supported Gearbox in Time Domain [J]. , 2012, 32(6): 62-65.
[14]	DING Wei,GUO Yun-song,LI Jia. Performance Analysis of Six-rod Shock-isolation Mount [J]. , 2012, 32(6): 66-69.
[15]	ZHOU Xiang-rong,LI Jia,FENG Hai-jun,GUAN Yue-ying. Ultimate Shock Load of KA Bending Rubber Vibration Isolator [J]. , 2012, 32(6): 70-73.

Computational Method for Shock Resistance Analysis of Piping System of Diesel Engine

柴油机管路系统抗冲击计算方法研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics