Performance Analysis of Six-rod Shock-isolation Mount

doi:10.3969/j.issn.1006-1335.2012.06.016

›› 2012, Vol. 32 ›› Issue (6): 66-69.DOI: 10.3969/j.issn.1006-1335.2012.06.016

Previous Articles Next Articles

Performance Analysis of Six-rod Shock-isolation Mount

DING Wei,GUO Yun-song,LI Jia

( Shanghai Marine Equipment Research Institute, Shanghai 200031, China )

Received:2012-06-11 Revised:2012-08-21 Online:2012-12-18 Published:2012-12-18

六支杆抗冲器性能分析

丁炜，郭云松，李佳

（上海船舶设备研究所，上海 200031 ）

通讯作者: 丁炜

Abstract

Abstract: A mechanical model of a six-rod shock-isolation mount with different crash-constraints was established. The dynamic characteristics of the shock-isolator were studied. A shock test was then carried out for the six-rod shock-isolation mount. The shock response and several key points for design of the six-rod shock-isolation mount were summarized through the comparison between theoretical and experimental results.

Key words: shock , six-rod shock-isolation mount , multi-rigid-body dynamic analysis , shock experiment

摘要： 采用不同的碰撞约束在多刚体动力学分析软件中建立六支杆抗冲器的力学模型，在此基础上抗冲器的动力学性能进行分析，对六支杆抗冲器样机进行冲击试验，通过过理论分析与试验结果对比，总结得出六支杆抗冲器的冲击特性及性能设计要点。

关键词: 冲击, 六支杆抗冲器, 多刚体动力学分析, 冲击试验

CLC Number:

DING Wei,GUO Yun-song,LI Jia. Performance Analysis of Six-rod Shock-isolation Mount[J]. , 2012, 32(6): 66-69.

丁炜，郭云松，李佳. 六支杆抗冲器性能分析[J]. 噪声与振动控制, 2012, 32(6): 66-69.

[1]	. Dropping Damage Evaluation for Critical Components of Tilted Support Systems [J]. , 2019, 39(1): 186-191.
[2]	zhang baogang. Design of Flexible Deck Simulators and Their Applications in Shock Resistance Tests [J]. , 2018, 38(2): 55-58.
[3]	. Design of Shock Absorbers for a Shipboard Electronic Cabinet [J]. , 2018, 38(1): 151-155.
[4]	. Analysis of the Shock Response of a Single-layer Vibration Isolation System with a Limiter [J]. , 2017, 37(5): 29-32.
[5]	. Analysis and Optimization of Creep Groan Noise Transfer Path for AT Vehicles [J]. , 2017, 37(5): 124-127.
[6]	. Simulation of Anti-shock Buffering Platform with Large Deformations in 3 Directions [J]. , 2017, 37(3): 185-188.
[7]	yong chen. Design of Plastic Restrictor in a Single-stage Vibration Isolation System [J]. , 2016, 36(3): 184-189.
[8]	. Shock Characteristics of a Three-reel Parallel-type Marine Winch [J]. , 2016, 36(2): 76-79.
[9]	. Variational Iteration Method for Analyzing Dropping Shock ofSuspended Spring System [J]. , 2013, 33(6): 36-39.
[10]	. Outlines of Anti-shock Design for Electronic Equipments on Ships [J]. , 2013, 33(6): 139-142.
[11]	. Comparative Study on UNDEX Resistance of the Air-backed Stiffened Plate with Various Covering Layers [J]. , 2013, 33(4): 11-15.
[12]	. Design of Natural Rubber/304 Composite Shock Absorber [J]. , 2013, 33(3): 231-234.
[13]	DAI Guang-hao,GAO Chang-wei,LIU Yong-heng,ZHANG Fan. Computation and Analysis of Shock Characteristics of Elastically Supported Gearbox in Time Domain [J]. , 2012, 32(6): 62-65.
[14]	ZHOU Xiang-rong,LI Jia,FENG Hai-jun,GUAN Yue-ying. Ultimate Shock Load of KA Bending Rubber Vibration Isolator [J]. , 2012, 32(6): 70-73.
[15]	GUO Yun-song,ZHANG Xin-wei,LI Jia,ZHOU Xiang-rong. Research of Testing Equipment Buffering Technology and Platform [J]. , 2012, 32(6): 74-77.

Performance Analysis of Six-rod Shock-isolation Mount

六支杆抗冲器性能分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics