Acoustic Simulation of Mufflers with Multiple Perforated Tubes

doi:10.3969/j.issn.1006-1355-2012.02.037

›› 2012, Vol. 32 ›› Issue (2): 151-154.DOI: 10.3969/j.issn.1006-1355-2012.02.037

• 7.减振降噪设备和器材 • Previous Articles Next Articles

Acoustic Simulation of Mufflers with Multiple Perforated Tubes

HE Yan-song, LI Jing,LU Hui-chao

( College of Mechanical Engineering, Chongqing University, Chongqing 400030, China )

Received:2011-08-15 Revised:2011-08-30 Online:2012-04-18 Published:2012-04-18
Contact: HE Yan-song

组合式穿孔管消声器声学仿真

贺岩松,李景,卢会超

（重庆大学机械工程学院，重庆 400030 ）

通讯作者: 李景

Abstract

Abstract: Based on acoustic FEM, the transmission losses of three mufflers with different combinations of perforated tubes were computed. The influences of the perforation porosities of the tubes on the transmission losses of the mufflers were discussed. Then, the acoustic performance of a complicated muffler with multiple perforated tubes was stimulated. The result shows that the transmission loss of the muffler is low when the noise frequency is below 1 000 Hz. This work provides a reference for further improvement of the muffler.

Key words: acoustics, transmission loss, simulation, muffler with perforated tubes

摘要： 运用声学有限元法，对三种组合结构的穿孔管消声器进行声学仿真计算，对比分析不同穿孔率对上述消声器声学性能的影响。并对某大型穿孔管消声器的整体声学性能进行仿真计算，结果表明其1000HZ以下中低频段的消声效果不佳，为后续改进工作提供某些依据。

关键词: 声学, 传递损失, 仿真分析, 穿孔管消声器

CLC Number:

TB535+.2

HE Yan-song;LI Jing;LU Hui-chao. Acoustic Simulation of Mufflers with Multiple Perforated Tubes[J]. , 2012, 32(2): 151-154.

贺岩松;李景;卢会超. 组合式穿孔管消声器声学仿真[J]. , 2012, 32(2): 151-154.

[1]	Yong fangKong. Comparative Study of Two Implementation Methods for Skyhook Damper in Soft Vibration Isolation Platform [J]. Noise and Vibration Control, 2022, 42(2): 226-230.
[2]	zegang -zhang li -gao. Design and optimization of suction muffler for reciprocating compressor [J]. Noise and Vibration Control, 2022, 42(2): 231-235.
[3]	. Influence of Coke Pushing Speed on Vibration Characteristics of the Coke Pushing Device [J]. , 2019, 39(3): 63-66.
[4]	Dingkejin. Analysis of Influences of theWorm Tongue Structure Type on the Internal Aerodynamic Actuation of Centrifugal Ventilators [J]. , 2019, 39(1): 216-220.
[5]	. Comparison and Exploration of Different Calculation Methods for Airflow Noise through Branch Take-offs [J]. , 2018, 38(6): 42-47.
[6]	. CFxLMS Algorithm with Variable Step Size and its Application to Simulation of Elevator Cabin Noise Active Control [J]. , 2018, 38(5): 57-61.
[7]	. Differential Geometry Decoupling Control of Vehicle’s Vertical Vibration under Random Road Excitations [J]. , 2017, 37(6): 1-6.
[8]	. Analysis of the Influence of Leakproofness of Cavities on Sound Transmission Loss in Compressor’s Suction Mufflers [J]. , 2017, 37(4): 227-233.
[9]	. Research on the S&R Evaluation Method of Automobile Seats Based on the BSR Tests [J]. , 2017, 37(3): 101-106.
[10]	. Study on Structural Vibration and Acoustic Radiation of Reinforced Outer Floors with Damping Materials [J]. , 2017, 37(2): 85-90.
[11]	. Study on Vibration Reduction of the Tank Engines based on MRE [J]. , 2017, 37(1): 72-75.
[12]	. BEM/FEM/SEA Hybrid Method for Sound Transmission Loss Calculation of Acoustic Materials [J]. , 2016, 36(6): 62-66.
[13]	. Optimum Design for a Quasi-zero Stiffness Vibration Isolation System Based on Genetic Algorithm [J]. , 2016, 36(6): 173-177.
[14]	. Comparative Study on the Flow Field and Acoustic Field Simulation for Noise Prediction Induced by the Flow around a Cylinder [J]. , 2016, 36(3): 26-31.
[15]	. Numerical Simulation of Flow-induced Noise in the Pipelines with Variable Cross-sections [J]. , 2016, 36(3): 48-51.

Acoustic Simulation of Mufflers with Multiple Perforated Tubes

组合式穿孔管消声器声学仿真

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics