›› 2011, Vol. 31 ›› Issue (6): 127-130.DOI: 10.3969/j.issn.1006-1355-2011.06.028

• 3.运载工具振动与噪声 • Previous Articles     Next Articles

Analysis of Dynamic Characteristics and Vibration Isolation Performance of Hydraulic Engine Mount

JIAO Dong-ming 1,ZHENG Ming-jun 1,CHEN Jun-wei 2   

  1. ( 1. College of Mechanical Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China; 2. Shijiazhuang Municipal Works Construction Corp, Shijiazhuang 050041, China )
  • Received:2011-02-14 Revised:2011-04-14 Online:2011-12-18 Published:2011-12-18
  • Contact: JIAO Dong-Ming

汽车液阻悬置动特性和隔振性能分析

焦东明1,郑明军1,陈军伟2   

  1. ( 1.石家庄铁道大学 机械工程学院, 石家庄 050043; 2.石家庄市 市政建设总公司, 石家庄 050041 )
  • 通讯作者: 焦东明

Abstract: A lumped parameter model of a hydraulic engine mount (HEM ) is built in order to analyze the low-frequency dynamic responses of the engine of a car. MATLAB code is used and the experiment is done for dynamic characteristics analysis. Both results are mutually in a good agreement. It shows that the HEM model can be used to analyze the dynamic response of the engine mount precisely. The full-vehicle dynamic model is built by ADAMS/CAR. Numerical simulations of the full-vehicle’s dynamic performance are carried out for the HEM and the rubber mount respectively. And their vibration isolation performances are compared mutually. The results show that the former have a better vibration isolation performance than the latter.

Key words: vibration and wave, hydraulic engine mount, modeling and simulation, dynamic characteristics, vibration isolation

摘要: 为分析某一型号轿车发动机液阻悬置在低频的动态特性,建立该悬置集总参数模型,应用MATLAB软件仿真的动特性曲线与试验曲线基本吻合,表明所建立的液阻悬置模型能较精确分析该悬置的动特性;并应用ADAMS/CAR软件建立整车模型,通过整车仿真来比较液阻悬置和橡胶悬置的隔振性能,结果表明前者具有更好的隔振性能。

关键词: 振动与波, 液阻悬置, 建模与仿真, 动特性分析, 隔振

CLC Number: