噪声与振动控制

噪声与振动控制 ›› 2013, Vol. 33 ›› Issue (3): 231-234.DOI: 10.3969/j.issn.1006-1335.2013.03.052

• 8.标准规范与评价 • 上一篇    下一篇

天然橡胶/304复合材料减振器的设计

赵程，罗昆，刘长红   

  1. ( 郑州航空工业管理学院  机电工程学院，郑州  450015 )
  • 收稿日期:2012-04-12 修回日期:2012-05-03 出版日期:2013-06-18 发布日期:2013-06-18
  • 通讯作者: 赵程

Design of Natural Rubber/304 Composite Shock Absorber

  • Received:2012-04-12 Revised:2012-05-03 Online:2013-06-18 Published:2013-06-18

PDF

摘要： 进行天然橡胶/304复合材料减振器的研究、设计，结果表明：通过打孔的方式降低减振器初期低应力阶段的刚度是可行的；通过复合钢丝网的方法提高减振器后期高应力阶段的刚度是可行的；确定天然橡胶/304复合材料减振器的最优工艺参数：孔径17.5 mm，在减振器孔的上、下部分分别复合3层304钢丝网，即共复合6层钢丝网；为减振器的研究与设计应用提供参考。

关键词: 振动与波, 金属橡胶, 304复合材料, 减振器

Abstract: The paper researches the natural rubber/304 shock absorber. The results show that it is feasible to reduce the initial stiffness of the shock absorber by drilling, and to improve the late stiffness by steel mesh composite. Optimum process parameters of the natural rubber/304 shock absorber were that diameters were 17.5mm, layers of steel mesh were 6. Reference for the research and design applications of the shock absorber was provided.

中图分类号: