噪声与振动控制 ›› 2013, Vol. 33 ›› Issue (3): 132-137.DOI: 10.3969/j.issn.1006-1335.2013.03.030

• 3.运载工具振动与噪声 • 上一篇    下一篇

汽车关门声品质评价参数的建立

赵丽路,于德介,陈关宝   

  1. ( 湖南大学  汽车车身先进设计制造国家重点实验室,  长沙  410082 )
  • 收稿日期:2012-07-13 修回日期:2012-10-18 出版日期:2013-06-18 发布日期:2013-06-18
  • 通讯作者: 于德介
  • 基金资助:

    湖南大学汽车车身先进设计制造国家重点实验室自主课题(60870002)

A Matric for Sound Quality Evaluation of Car’s Door-slamming

  • Received:2012-07-13 Revised:2012-10-18 Online:2013-06-18 Published:2013-06-18

摘要: 针对汽车关门声品质评价问题,基于Hilbert-Huang变换,研究提出一个新的声品质评价参数—SMHHT(Sound Metric based on Hilbert-Huang Transform)。在进行汽车关门声品质评价时,先采集汽车关门声音信号,进行EMD分解和Hilbert变换,再根据得到的瞬时频率对相应的IMF分量进行临界频率带计权并计算其能量,即可得到新的声品质评价参数SMHHT。为了验证该参数的有效性,将该参数和传统的声品质评价参数(响度,尖锐度)分别与主观评价结果进行相关性分析,结果表明提出的声品质评价参数SMHHT与主观评价结果有更高的相关性,能更准确的评价汽车关门声品质。

关键词: 声学, Hilbert-Huang变换, 汽车NVH, 响度, 尖锐度, 声品质评价参数

Abstract: Sound quality has become a new developing research area of vehicle NVH(Noise Vibration and Harshness). For sound quality evaluation of door-slamming,a new sound metric SMHHT(Sound Metric based on Hilbert-Huang Transform) is developed based on Hilbert-Huang Transform. First, the sound signals of door-slamming are sampled and decomposed by EMD and transformed by Hilbert Transform. Then based on the instantaneous frequency, the corresponding IMF components can be weighted by critical frequency band and be calculated its energy, and the new sound metric SMHHT is calculated. In order to verify the effectiveness of the new sound metric, correlation analysis is carried out between the new sound metric and the subjective evaluation results,as well as the traditional sound quality evaluation parameters, including loudness, sharpness, and the subjective evaluation values. The result shows that the new sound metric proposed in this paper has the higher correlation with the subjective evaluation values, so the new sound metric can evaluate the door-slamming sound quality more accurately.

中图分类号: