Journals
  Publication Years
  Keywords
Search within results Open Search
Please wait a minute...
For Selected: Toggle Thumbnails
Research of Relief Annealing Technology for 304 Metal Rubber
ZHAO Cheng;LUO Kun;LI Xiang
   2011, 31 (6): 180-182.   DOI: 10.3969/j.issn.1006-1355-2011.06.041
Abstract （1960）            Save
Relief annealing technique of 304 Metal Rubber is researched. Test results show that relief annealing can significantly change the static loss factor and the dynamic loss factor of 304 Metal Rubber. It is found that the influences of annealing temperature, annealing time, Metal Rubber density and cooling manner on the static loss factor and the dynamic loss factor are obviously different. The optimal combination of the relief annealing parameters of 304 Metal Rubber is: annealing temperature 270 ℃, annealing time 25 minutes, Metal Rubber density 1.6 g/cm3, and oil cooling manner.
Related Articles | Metrics
《Study on Fatigue Behavior of 65Mn MR Made of Thin Wires》
ZHAO Cheng;LUO Kun;LIU Chang-hong
   2010, 30 (1): 106-108.   DOI: 10.3969/j.issn.1006-1355.2010.01.106
Abstract （1945）      PDF（pc） （743KB）（1403）       Save
The fatigue behavior of 65Mn metallic rubber (MR) made of thin wires is studied. The results show that with the increasing of the density of the MR, the stiffness of soft characteristic range increases, static and dynamic loss factors, and fatigue life expectancy decrease.
Related Articles | Metrics
《Study on Viscoelastic Constitutive Model of MR》
ZHAO Cheng;ZHANG Jun
   2009, 29 (5): 87-89.  
Abstract （2618）      PDF（pc） （881KB）（3335）       Save
Applying the tensioncompression viscoelastic model of metallic rubber (MR), the constitutive law of MR is obtained by means of ANSYS code with quilibrium iteration. The computation result is in good accordance with the experimental data. This work provides a reference for further study of MR.
Related Articles | Metrics