Simulation of Sound Radiation Characteristics and Structure Optimization of a Gear Pump

doi:10.3969/j.issn.1006-1335.2012.06.009

›› 2012, Vol. 32 ›› Issue (5): 42-45.DOI: 10.3969/j.issn.1006-1335.2012.06.009

Previous Articles Next Articles

Simulation of Sound Radiation Characteristics and Structure Optimization of a Gear Pump

ZHU Jiang-sen , CHEN Jian , GUO Yan-ru

（ Institute of Sound and Vibration Research, Hefei University of Technology, Hefei 230009, China ）

Received:2012-01-09 Revised:2012-03-26 Online:2012-10-18 Published:2012-10-15

齿轮泵声辐射性能仿真分析与结构优化

朱江森¹,陈剑²,郭艳茹³

（合肥工业大学噪声振动工程研究所，合肥 230009 ）

通讯作者: 朱江森

Abstract

Abstract: The finite element model of structure of a gear pump is established with software Hypermesh, and the inherent vibration modes are extracted. By using software LMS.Virtual. Lab the frequency response and accelerations at all nodes are gained based on its modes. In the calculation of acoustic BEM (boundary element method) module direct BEM has been used to find out acoustic responses at standard field points. Results show that sound radiation characteristics of the gear pump correlate with its modal shapes. For reducing noise radiated by the gear pump a modification program of the gear pump’s structure has been proposed.

Key words: acoustics , pump , DBEM , simulation analysis

摘要： 在软件Hypermesh中建立齿轮泵结构有限元模型，提取其结构模态；在软件LMS. Virtual. Lab中，结合齿轮泵的模态，得出泵体模态的频率响应和节点加速度；在声学边界元模块中，利用直接边界元法计算标准场点处的声学响应；分析得出泵的声辐射性能与其模态振型相关，提出结构改进方案，以改善模态振型，从而降低泵的辐射噪声。

关键词: 声学, 齿轮泵, 直接边界元法, 仿真分析

CLC Number:

朱江森,陈剑,郭艳茹. 齿轮泵声辐射性能仿真分析与结构优化[J]. 噪声与振动控制, 2012, 32(5): 42-45.

[1]	. Influence of Coke Pushing Speed on Vibration Characteristics of the Coke Pushing Device [J]. , 2019, 39(3): 63-66.
[2]	. Application of Acoustic Array Testing Technique in Miniature Pump Noise Reduction [J]. , 2019, 39(3): 235-240.
[3]	. Design of Noise Reduction for a Cylindrical Sewage Pumping Station [J]. , 2019, 39(3): 245-249.
[4]	. Research on the S&R Evaluation Method of Automobile Seats Based on the BSR Tests [J]. , 2017, 37(3): 101-106.
[5]	. Research of Low Noise Hydraulic Model for Auxiliary Circulating Pumps of Ships [J]. , 2016, 36(6): 72-76.
[6]	. Comparative Study on the Flow Field and Acoustic Field Simulation for Noise Prediction Induced by the Flow around a Cylinder [J]. , 2016, 36(3): 26-31.
[7]	. Research on Pump-induced Pulsation of the Principal Loops of Nuclear Power Stations [J]. , 2015, 35(4): 224-227.
[8]	. Study on Measurement Method of Bearing Stiffness without Disassembling [J]. , 2014, 34(4): 128-133.
[9]	Xu Lu-Wen. Noise Forecast and Optimal Control Design of Out-door Substation [J]. , 2013, 33(1): 152-156.
[10]	HE Yu-yang 1, 2, JIN Xiao-xiong 1, WEI Huan 1. Bending Vibration Performance of Sheet-shaped Phononic Crystals [J]. , 2012, 32(6): 141-145.
[11]	ZHOU Hai-chao,WANG Guo-lin,LIANG Chen. Analysis of Radiation Noise Characteristics of Tires with Different Tread Patterns [J]. , 2012, 32(6): 175-178.
[12]	CUI Xiao-bing,JI Zhen-lin,WU Yao. Fast Multipole Boundary Element Method for Prediction of Ship Cabin’s Noise [J]. , 2012, 32(6): 179-183.
[13]	DAI Hai-bo,SHAN Rui,WANG Huan-peng,ZHANG Yan. Study on Wavelet Denoising Algorithm Based on Improved Threshold Function and Maximal Overlap Discrete Wavelet Packet Transform [J]. , 2012, 32(6): 189-193.
[14]	HAN Hong-liang,LIU Zhi-hong,YI Chui-jie,ZHANG Ying. Characteristics of Cutting Noise of Large Cold Saw Machine [J]. , 2012, 32(6): 203-207.
[15]	CHEN Chang-sheng 1,MA Jun 2, LIU Rui-feng 1,ZHOU PU 1, WANG Qiang 1. Experimental Study on Centrifugal Pump Vibration in Different Operation Conditions [J]. , 2012, 32(6): 199-202.

Simulation of Sound Radiation Characteristics and Structure Optimization of a Gear Pump

齿轮泵声辐射性能仿真分析与结构优化

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics