Research of AANC Secondary Path Modeling Method

doi:10.3969/j.issn.1006-1355-2011.03.008

›› 2011, Vol. 31 ›› Issue (3): 33-36.DOI: 10.3969/j.issn.1006-1355-2011.03.008

• 2.振动理论与数值解法 • Previous Articles Next Articles

Research of AANC Secondary Path Modeling Method

YANG Hao 1，WU Ya-feng 1，WANG Chun-yun 1，CHU Ni-Sheng 2

( 1. School of Engine and Energy, Northwestern Polytechnical University, Xi’an 710072， China；2. CNPC Well Logging Ltd., Xi’an 710072, China)

Received:2010-09-06 Revised:2010-10-12 Online:2011-06-18 Published:2011-06-18
Contact: YANG Hao

AANC次级通道建模方法研究

杨浩1，吴亚锋1，王春云1，储妮晟2

（ 1. 西北工业大学动力与能源学院，西安 710072； 2. 中国石油集团测井有限公司，西安 710077 ）

通讯作者: 杨浩

Abstract

Abstract: Secondary path modeling is a key issue of adaptive active noise control (AANC) system. An impulse response measurement based on time stretch pulse (TSP) signal is used in this paper. TSP signal has the characteristics of distributing the pulse energy in a period of time. The impulse response function of the tested system with TSP signal can be reconstructed by gathering the scattered energy in the response signal. The method is applied to secondary path modeling, and 20dB and 14dB noise reduction is respectively obtained in simulations and experiments. The results show that the secondary path modeling method based on TSP is simple, accurate and very suitable for practical ANC engineering test.

Key words: acoustics, time-stretched pulse (TSP), active noise control, secondary path, simulation

摘要： 次级通道建模是自适应主动噪声控制（AANC）系统的一个关键问题。应用一种基于时间扩展脉冲（TSP）信号的脉冲响应测量方法。TSP信号具有脉冲能量分布于一段时间的特性，将其作为被测系统的激励，再将其响应信号中的分散能量聚集，即可重构得到系统的脉冲响应函数。该方法被应用于AANC的次级通道建模，仿真和实验分别得到20 dB和14 dB的降噪效果。研究结果表明，该方法实现简单易行，结果准确可靠，非常适用于实际的ANC工程实验。

关键词: 时间扩展脉冲, 主动噪声控制, 次级通道, 仿真

CLC Number:

TP301.6

YANG Hao;WU Ya-feng;WANG Chun-yun;CHU Ni-Sheng. Research of AANC Secondary Path Modeling Method[J]. , 2011, 31(3): 33-36.

杨浩;吴亚锋;王春云;储妮晟. AANC次级通道建模方法研究[J]. , 2011, 31(3): 33-36.

[1]	Yong fangKong. Comparative Study of Two Implementation Methods for Skyhook Damper in Soft Vibration Isolation Platform [J]. Noise and Vibration Control, 2022, 42(2): 226-230.
[2]	. Influence of Coke Pushing Speed on Vibration Characteristics of the Coke Pushing Device [J]. , 2019, 39(3): 63-66.
[3]	Dingkejin. Analysis of Influences of theWorm Tongue Structure Type on the Internal Aerodynamic Actuation of Centrifugal Ventilators [J]. , 2019, 39(1): 216-220.
[4]	. Comparison and Exploration of Different Calculation Methods for Airflow Noise through Branch Take-offs [J]. , 2018, 38(6): 42-47.
[5]	. CFxLMS Algorithm with Variable Step Size and its Application to Simulation of Elevator Cabin Noise Active Control [J]. , 2018, 38(5): 57-61.
[6]	. An Online Secondary Path Modeling Algorithm based on Gradient Descent for Active Noise Control [J]. , 2018, 38(3): 15-19.
[7]	. Differential Geometry Decoupling Control of Vehicle’s Vertical Vibration under Random Road Excitations [J]. , 2017, 37(6): 1-6.
[8]	. Research on the S&R Evaluation Method of Automobile Seats Based on the BSR Tests [J]. , 2017, 37(3): 101-106.
[9]	. Study on Vibration Reduction of the Tank Engines based on MRE [J]. , 2017, 37(1): 72-75.
[10]	. Optimum Design for a Quasi-zero Stiffness Vibration Isolation System Based on Genetic Algorithm [J]. , 2016, 36(6): 173-177.
[11]	. Comparative Study on the Flow Field and Acoustic Field Simulation for Noise Prediction Induced by the Flow around a Cylinder [J]. , 2016, 36(3): 26-31.
[12]	. Numerical Simulation of Flow-induced Noise in the Pipelines with Variable Cross-sections [J]. , 2016, 36(3): 48-51.
[13]	. Time-domain CFD Analysis of Acoustic Attenuation Performance of Hybrid Expansion Chamber Silencers [J]. , 2016, 36(2): 88-91.
[14]	. Analysis of Influence of the Rotation Direction on Aerodynamic Noise of a Vehicle Alternator [J]. , 2016, 36(2): 148-152.
[15]	. [J]. , 2015, 35(6): 172-175.

Research of AANC Secondary Path Modeling Method

AANC次级通道建模方法研究

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics