噪声与振动控制 ›› 2018, Vol. 38 ›› Issue (5): 230-233.DOI: 10.3969/j.issn.1006-1355.2018.05.041

• 减振降噪设备与器材 • 上一篇    下一篇

空压机排气放空复合消声器设计与性能分析

温华兵,李晓亮,吴晓佳   

  1. ( 江苏科技大学能源与动力学院,江苏镇江212003 )
  • 收稿日期:2018-01-08 修回日期:2018-03-05 出版日期:2018-10-18 发布日期:2018-10-18
  • 通讯作者: 温华兵

Design and Performance Analysis of Jet-exhaust Mufflers of Air Compressors

Wen Hua-bing   

  • Received:2018-01-08 Revised:2018-03-05 Online:2018-10-18 Published:2018-10-18
  • Contact: Wen Hua-bing

摘要:

为降低空压机的高压排气放空气流噪声,给出了节流降压板、片式消声通道及小孔喷注层的消声性能经验公式计算方法,设计了一款适用于排气放空气流的复合消声器。在Virtual.Lab中建立了复合消声器的声学有限元模型,开展了消声器的传递损失性能分析。仿真结果表明:声学有限元仿真与经验公式计算的传递损失结果较为接近;所设计的高压排气放空复合消声器在20Hz~3000Hz宽频段内具有理想的消声效果,平均消声量可达57dB。

关键词: 声学, 消声器, 声学性能, 传递损失, 传递导纳法, 气流噪声

Abstract:

To reduce the high-pressure jet exhaust gas flow noise of air compressor, the empirical formula calculation methods of the acoustic performance for throttle injection, dissipative silencer with absorbent plates and small apertures spray were given. A composite muffler for jet exhaust gas flow was designed. The acoustic finite element model of the composite muffler was built in the Virtural.Lab to simulate the transmission loss performance of the muffler. The simulation result indicates that the empirical formula calculation results are close to the simulation results. A desirable broadband acoustic attenuation in wide range of 20Hz~3000Hz can be obtained. The average amount of noise elimination of the jet exhaust composite muffler is 57dB.